Metal Building Prices in Matagorda County, Texas

Metal building representative of Matagorda County, Texas

Installed price ranges below are engineered to Matagorda County's design loads — 149 mph design wind speed, TDI windstorm (WPI-8) certification, and no governing snow load. Pick a size for the full breakdown.

Serving Bay City, Palacios, Blessing and the rest of Matagorda County.

Matagorda County design loads & local facts (ASCE 7-22, Risk Category II)
Design wind speed 149 mph — Coastal high wind
Ground snow load 0 psf — non-governing
Seismic design category A — non-governing in TX
TDI windstorm (WPI-8) Required — catastrophe area
Region / county seat Coastal · Bay City
Permitting office Matagorda County Environmental Health / Floodplain Administration · 979-244-2717

Prices by size in Matagorda County

Installed & delivered ranges, Matagorda County (estimate — not a quote)
SizeSq ftInstalled range
12×20 240 $4,400 – $8,000
20×20 400 $7,400 – $13,500
20×30 600 $11,100 – $19,700
24×30 720 $13,500 – $24,000
30×30 900 $16,600 – $30,100
24×40 960 $17,800 – $32,000
30×40 1,200 $20,900 – $36,900
30×50 1,500 $25,800 – $46,100
40×40 1,600 $27,700 – $49,200
30×60 1,800 $30,800 – $55,400
40×60 2,400 $41,200 – $73,800
50×50 2,500 $43,100 – $76,900
50×60 3,000 $51,700 – $81,200
40×80 3,200 $55,400 – $86,700
40×100 4,000 $68,900 – $108,200
50×80 4,000 $68,900 – $108,200
60×80 4,800 $82,400 – $129,800
50×100 5,000 $86,100 – $135,300
60×100 6,000 $103,300 – $162,400
60×120 7,200 $124,200 – $195,000
80×100 8,000 $137,800 – $216,500

Estimated range based on 2026 market data and Matagorda County design requirements. Final pricing requires a dealer quote.

Building in Matagorda County

Matagorda County is open-coast wind country at 149 mph design wind speed — among the highest in Texas. Buildings here are engineered for direct hurricane exposure: heavy-gauge frames, dense fastening, upgraded anchorage, and stamped drawings are not optional. This is the single biggest driver of the price band above, and it's why a building in Bay City costs more than the same size inland.

TDI windstorm certification (WPI-8) applies here

Matagorda County is inside a Texas Department of Insurance (TDI) designated catastrophe area. To insure a structure through the Texas Windstorm Insurance Association (TWIA) — and often to satisfy the local building department — the building must be engineered to TDI standards and pass a WPI-8 windstorm inspection. In practice that means TDI-approved product evaluations, an engineer's design that meets the county wind load, and inspection at framing and completion so the installer can file for the WPI-8 certificate of compliance.

Budget for engineered, stamped plans and the inspection itself. Skipping certification can leave the building uninsurable against wind and hail in this county, so we've built the WPI-8 premium into the coastal price band rather than hiding it.

Foundation & slab in Matagorda County

Steel is only half the job — the concrete under it is the other half. Gulf Coast soils are typically soft coastal clay and sand with a high water table. Slabs here usually need a thicker turned-down edge, more reinforcement, and sometimes select fill — the concrete line item runs higher than the Texas average, and a soils report is money well spent. The slab range shown in the estimator is a Texas-typical figure; your final number depends on a soils report and the local ready-mix price.


Get Matagorda County pricing

Get matched with Texas metal-building suppliers
Free, no obligation. We share your request with vetted suppliers — we don't sell buildings.

Advertising disclosure: we may earn a referral fee if you request a quote through this link. It never changes your price.How we make money


Nearby counties