30×60 Metal Building Cost in Hays County, Texas
Estimated range based on 2026 market data and Hays County design requirements. Final pricing requires a dealer quote.
Prefer a kit you install yourself? A 30×60 kit-only package in Hays County runs about $18,000 – $30,500 (steel only, no erection or slab). The installed range above includes delivery and erection.
We price 30×60 metal buildings for San Marcos, Kyle, Buda, Wimberley and across Hays County.
What the 30×60 estimate includes — and what it doesn't
Most price pages won't tell you this. The slab alone can add a third again on top of the building, so here's the honest breakdown.
Included in the installed range
- The building — frame, roof and wall panels, trim, fasteners
- Engineering for Hays County's loads — 107 mph design wind, 5 psf snow
- Stamped drawings for your permit application
- Delivery to your prepared site
- Professional erection on a level, ready pad
- Anchors for the slab or ground type specified
Not included — budget separately
| Item | Typical cost |
|---|---|
| Concrete slab Texas-typical for 30×60 — about $5.00–$9.00/sq ft. Depends on soils report and local ready-mix. | $9,000 – $16,200 |
| 10×10 roll-up door Each | $1,200 |
| 12×12 roll-up door Each | $1,600 |
| 3'×7' walk-in door Each | $450 |
| 3'×3' window Each | $350 |
| Insulation Double-bubble through R-17 double-layer, quoted per sq ft of covered area (roof + walls), not footprint. | $1.50–$3.00/sq ft |
| Permit fees Set by Hays County Development Services. Fees differ inside city limits, in the ETJ, and unincorporated — confirm directly. | Varies |
Site prep — clearing, grading, and getting a truck to the pad — is the other variable we can't price for you. A level, accessible site is what keeps an install to a single day; a sloped or tight one is where surprise costs come from.
Price estimator
Estimate your build
Adjust size, county, height and doors for a live range. Same math as the price band above.
What drives the price in Hays County
A 30×60 building (1,800 sq ft) is a true shop or barndominium-core footprint — room for multiple bays, equipment, an RV, or a living-plus-workspace conversion. This is the sweet spot where buyers weigh a kit against a turnkey install. In Hays County, the design loads above — not just the size — decide where in the range your price lands.
Hays County carries an ASCE 7-22 design wind speed of 107 mph (Risk Category II), which is near the Texas inland baseline. A standard engineered metal building meets this with typical bracing and anchor-bolt spacing, so wind adds little or nothing to the base price here — the frame you'd order for most of North and Central Texas.
Foundation & slab in Hays County
Steel is only half the job — the concrete under it is the other half. The Austin area straddles Blackland clay to the east and Balcones limestone to the west, so conditions vary lot to lot. Clay sites need a stiffened, well-reinforced slab; rock sites can pour thinner but may need breaking or leveling. Confirm which you have before budgeting the foundation. The slab range shown in the estimator is a Texas-typical figure; your final number depends on a soils report and the local ready-mix price.
Hays County has a light ground snow load of 5 psf, which the standard roof package already handles. It does not add to the price here.
Hays County is Seismic Design Category A. Like nearly all of Texas, seismic loads do not govern a metal building's design here — wind is the controlling force, not earthquakes — so seismic adds nothing to the price band.
Permits in Hays County
For a metal building in Hays County, permitting typically runs through the Hays County Development Services (512-393-7779). Requirements vary by whether you're inside a city limit, in the ETJ, or unincorporated, and most departments want the supplier's engineered, stamped drawings before they'll issue. Confirm current fees and setbacks with the office directly — we verify these links but rules change.
Frequently asked questions
- How much does a 30×60 metal building cost in Hays County, TX?
- A 30×60 metal building in Hays County typically runs $25,000 – $45,000 installed and delivered. That range reflects Hays County's 107 mph design wind speed and current Texas market pricing. Final pricing requires a dealer quote.
- Why does the price change by county?
- Steel is engineered to local building loads. A county's design wind speed, snow load, seismic category, and — on the coast — TDI windstorm certification all change how much steel and engineering the building needs. That's why Hays County has its own price band instead of one statewide number.
- Do I need a permit for a metal building in Hays County?
- Usually yes. Permitting typically runs through the Hays County Development Services, and most departments require the supplier's engineered, stamped drawings. Requirements differ inside city limits versus unincorporated areas — confirm with the office before ordering.