Metal Building Prices in Hays County, Texas
Installed price ranges below are engineered to Hays County's design loads — 107 mph design wind speed and 5 psf snow. Pick a size for the full breakdown.
Serving San Marcos, Kyle, Buda, Wimberley, Dripping Springs and the rest of Hays County.
| Design wind speed | 107 mph — Inland baseline |
|---|---|
| Ground snow load | 5 psf |
| Seismic design category | A — non-governing in TX |
| TDI windstorm (WPI-8) | Not required |
| Region / county seat | Austin Metro · San Marcos |
| Permitting office | Hays County Development Services · 512-393-7779 |
Prices by size in Hays County
| Size | Sq ft | Installed range |
|---|---|---|
| 12×20 | 240 | $3,600 – $6,500 |
| 20×20 | 400 | $6,000 – $11,000 |
| 20×30 | 600 | $9,000 – $16,000 |
| 24×30 | 720 | $11,000 – $19,500 |
| 30×30 | 900 | $13,500 – $24,500 |
| 24×40 | 960 | $14,500 – $26,000 |
| 30×40 | 1,200 | $17,000 – $30,000 |
| 30×50 | 1,500 | $21,000 – $37,500 |
| 40×40 | 1,600 | $22,500 – $40,000 |
| 30×60 | 1,800 | $25,000 – $45,000 |
| 40×60 | 2,400 | $33,500 – $60,000 |
| 50×50 | 2,500 | $35,000 – $62,500 |
| 50×60 | 3,000 | $42,000 – $66,000 |
| 40×80 | 3,200 | $45,000 – $70,500 |
| 40×100 | 4,000 | $56,000 – $88,000 |
| 50×80 | 4,000 | $56,000 – $88,000 |
| 60×80 | 4,800 | $67,000 – $105,500 |
| 50×100 | 5,000 | $70,000 – $110,000 |
| 60×100 | 6,000 | $84,000 – $132,000 |
| 60×120 | 7,200 | $101,000 – $158,500 |
| 80×100 | 8,000 | $112,000 – $176,000 |
Estimated range based on 2026 market data and Hays County design requirements. Final pricing requires a dealer quote.
Building in Hays County
Hays County carries an ASCE 7-22 design wind speed of 107 mph (Risk Category II), which is near the Texas inland baseline. A standard engineered metal building meets this with typical bracing and anchor-bolt spacing, so wind adds little or nothing to the base price here — the frame you'd order for most of North and Central Texas.
Foundation & slab in Hays County
Steel is only half the job — the concrete under it is the other half. The Austin area straddles Blackland clay to the east and Balcones limestone to the west, so conditions vary lot to lot. Clay sites need a stiffened, well-reinforced slab; rock sites can pour thinner but may need breaking or leveling. Confirm which you have before budgeting the foundation. The slab range shown in the estimator is a Texas-typical figure; your final number depends on a soils report and the local ready-mix price.